Please choose type, product or field, and click “Search”
Design consulting for Xylon
BPM Processor Upgrades At SPEAR3
In this paper we show measurements and discuss our experience with the Libera SPARK series of BPM processors and comment on the software integration.
Beam Measurements Results Of A BPM System Implementing The Pilot-tone Stabilization Concept
The next generation light sources will require Beam Position Monitoring systems capable of performing high resolution measurements as well as assuring long-term measurement stability. One possible solution to stabilize the position measurements long-term drifts is using a pilot-tone signal which is transferred together with the BPM signal and measured by the BPM electronics.
Machine Studies With Libera Instruments At The SLAC SPEAR3 Accelerators
Turn-by-turn BPM readout electronics were tested on the SPEAR3 booster synchrotron and storage ring to identify possible improvements in data acquisition.
Libera Book 2019
Libera book is an annual brochure we issue with the aim of giving a general overview of all our products in the particle accelerator market, as well as technical specifications and new advancements.
Optimized Beam Loss Monitor System For The ESRF
This paper describes the BLD/BLM design, its functionality and performance characteristics, and shows results from prototypes installed in the injection zone and in close vicinity to in-vacuum undulators.
Libera LLRF Tests at FLASH doc
The Libera LLRF system was demonstrated at FLASH ACC456. Three Libera LLRF units were configured in order to control the 24 acceleration cavities, 72 RF signals were acquired and processed in real time.
LINAC Subsystems for Better Beam Control…LINAC10, Japan
For optimal control and especially for accelerators aiming at the highest level of performance, for example FELs, these systems should be considered as a whole and work together. At Instrumentation Technologies such systems have been developed and tested on the field.